Endeavour Fires Holbeck Review UK 2026
Quick verdict
Score: 9.4/10
Best for: Adding a fireplace feature and supplementary warmth without a chimney
Not for: Heating a large or poorly insulated room - electric fires are supplementary heat
Bottom line: A practical electric fireplace (wall-mounted fire, 2kW) for a cosy focal point.
What makes the Holbeck stand out is that it is a wall-mounted electric fireplace by The Endeavour Fires Holbeck, with a 2kW heater output option and a remote control. It is designed for a fixed media or inset style setup, with the wall presentation matching common in-wall viewing areas.
Key specifications
| Spec | Value |
|---|---|
| Mounting | Wall-mounted |
| Power | 220/240Vac, 50 Hz |
| Settings | 1 and 2kW |
| Timer/Remote | 7 day programmable remote |
Pros
- Wall-mounted fire
- 2kW heat output
- Remote control
- No chimney, flue or fuel needed - just a socket
Cons
- Supplementary heat only - not a replacement for central heating
- Needs a socket within reach; avoid extension leads at full heat
- Running at full heat costs the same as any 2kW electric heater
Style and Installation
Despite being designed for a wall-mounted fixed inset or media-wall setup, this electric fireplace requires careful planning before installation. As a black wall-mounted electric fireplace, the chosen recess depth, plasterboard thickness, and surround finish need to create a clean front face. Before mounting, the installer should mark the fixing points, confirm the mains cable route, and allow space for the 7 day programmable remote control so the switch control remains easily accessible if needed. Brackets and level checks should be completed first, followed by wiring and securing, and then the front trim should be aligned to reduce visible gaps.
Heat Output and Room Size
How much heat the Endeavour Fires provides in everyday use depends mainly on where it is installed and how the room is arranged, as it is rated at 1kW and 2kW as a wall-mounted electric design. For smaller rooms, the 1kW setting may feel suitable, while larger or colder spaces can require the 2kW level. Heat spread is also influenced by airflow around the unit, the wall material, and whether furniture blocks the front. For a comfortable temperature, begin with the lower power setting, run it for 15-20 minutes, then adjust as needed, with drafty rooms typically needing a higher output.
Flame Effect and Realism
Flame effect quality is often the first detail noticed once the electric fireplace is installed, shaping whether the room reads as warm and welcoming even when the heater output is set low. Reviewers typically assess realism through the flame movement, the sense of depth within the flames and whether the light edges stay sharp against the black wall finish. In use, the 1kW or 2kW electric heater supports a decorative flame look without requiring the higher output. If the flame effect appears flat or overly uniform, the overall ambience can feel less natural.
Controls and Features
Controls and features on the Endeavour Fires are built around everyday wall-mount use, with a 7-day programmable remote control heater included. The electric fireplace can be operated from a distance using the remote, with scheduling available across a full week to match daily plans. Output control is straightforward, as the unit is listed as 1 to 2kW at 220/240Vac, 50 Hz. For changes such as timing and power, the remote must be within working range, and no additional adjustment options beyond programming are specified.
Who Is This For?
The electric fireplace is a wall-mounted electric fireplace designed for a simple inset or media-wall style installation. It offers 1 and 2kW heat settings, with remote control and 7-day programmable scheduling. The lower setting suits smaller rooms, while the higher setting is for faster heat-up.
Where to Buy in the UK
Finding the Endeavour Fires Holbeck in the UK is usually a matter of checking common retailer routes for wall-mounted electric fireplaces. This model is specified as a black, wall-mounted unit with a 220-240Vac input, 1-2kW heat output, and a 7-day programmable remote control. Buyers can start with specialist electric fire retailers and media-wall suppliers, then compare against major home-electrical chains that stock similar wall-mounted electric units. If availability is limited, marketplace listings should be checked carefully to confirm the exact "Holbeck" variant, remote type, and voltage before ordering, and delivery timing and return terms should be reviewed.
Frequently Asked Questions
Is the Endeavour Fires worth it?
As a room feature with supplementary heat, the electric fireplace (wall-mounted fire) does the job, with 2kW of heat. Electric fires are chosen mainly for the look and the instant, flue-free warmth. Check the current Amazon UK price, as fireplaces are discounted heavily outside the autumn peak.
How is the Endeavour Fires installed?
The electric fireplace is a wall-mounted fire. Wall-mounted fires hang on the wall using the supplied bracket - check the wall type and use appropriate fixings, especially on plasterboard - and need a socket or a spur within reach.
How much heat does this electric fireplace give out?
The Endeavour Fires is rated at 2kW. Most electric fires top out around 2kW, which realistically takes the chill off a small to medium room rather than heating a large or poorly insulated space. Treat it as supplementary heating and a focal point rather than a replacement for central heating. The lower setting is usually the more economical everyday choice.
What features does the Endeavour Fires Holbeck have?
The electric fireplace offers remote control. A remote is genuinely useful on an inset or wall-mounted fire you can't easily reach. Match the features to how you'll actually use it.
Are electric fireplaces expensive to run?
Running cost depends on the heat setting and your electricity tariff. At full output most electric fires draw around 2kW, so an hour at full heat costs roughly the same as running any 2kW heater - use the lower setting or a thermostat to cut that considerably. Crucially, the flame effect alone uses very little (it's just LEDs), so leaving the flames on without heat costs pennies.